Mitsubishi — ROCKER ARM

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. 1. Check the roller or slipper surface. If any dents,
2. damage or seizure is evident, replace the rocker
3. arm.
4. 2. Check the roller for smooth rotation. If it does
5. not rotate smoothly, or if looseness is evident,
6. replace the rocker arm.
7. 3. Check the inside diameter. If damage or seizure
8. is evident, replace the rocker arm.

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.