Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›<<B>> RETAINER LOCK REMOVAL

Mitsubishi — <<B>> RETAINER LOCK REMOVAL

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

  1. 1. Set special tool valve spring compressor
  2. (800426), as illustrated, to compress the valve
  3. spring. Remove the retainer lock.
  4. 2. Relieve the spring tension and remove the valve,
  5. retainer, spring, etc. Store removed valves, springs,
  6. and other parts, tagged to indicate their cylinder
  7. number and location for assembly.

Tools required

  • 1. Set special tool valve spring compressor

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.