Mitsubishi — 8. Remove the screwdriver inserted in step 4 and

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

1. 10. Install special tool Tension pulley socket
2. wrench (800407), socket wrench and torque
3. wrench, onto the tensioner pulley, and loosen the
4. tensioner pulley center bolt.
5. NOTE: Use a torque wrench that can measure 0
6. to 5.0 N·m.
7. 11. Torque to 2.5-2.6 N·m with the torque wrench.
8. 12. Holding the tensioner pulley with special tool
9. Tension pulley socket wrench (800407) and
10. torque
11. wrench
12. tighten
13. the
14. center
15. bolt
16. to
17. specification.
18. Tightening torque: 48 ± 5 N·m

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.