Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›<<D>>CRANKSHAFT SPROCKET REMOVAL

Mitsubishi — <<D>>CRANKSHAFT SPROCKET REMOVAL

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Procedure

  1. 1. Set special tool Crankshaft sprocket puller
  2. (800399) as shown in the illustration.
  3. 2. Screw in the center bolt of the special tool to
  4. remove the crankshaft sprocket.

Tools required

  • 1. Set special tool Crankshaft sprocket puller
  • 2. Screw in the center bolt of the special tool to

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.