Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Procedure 10

Mitsubishi — Procedure 10

A Mitsubishi service procedure — check it applies to your exact model before use.

Browse Mitsubishi generators & specs →

Before you start

  • NOTE: Upon completion of air bleeding, hold the

Procedure

  1. 2. PCV hose 13. Rocker arm "B"
  2. 3. PCV valve 14. Rocker arm shaft (Intake side)
  3. 4. PCV valve gasket >>B<< 15. Lash adjuster
  4. 5. Oil filler cap 16. Rocker arm "C"
  5. 6. Rocker cover 17. Rocker arm shaft (Exhaust side)
  6. 7. Rocker cover gasket >>B<< 18. Lash adjuster
  7. 8. Oil seal >>A<< 19. Oil seal
  8. <<A>> >>C<< 9. Rocker arms and rocker arm shaft 20. Thrust case
  9. <<A>> >>C<< 10. Rocker arms and rocker arm shaft 21. O-ring
  10. >>C<< 11. Rocker arm shaft ring 22. Camshaft
  11. 19
  12. 1
  13. 3
  14. 2
  15. 4
  16. 5
  17. 6
  18. 8
  19. 7
  20. 1
  21. 7
  22. 1
  23. 6
  24. 1
  25. 6

Tools required

  • 2. Using the special tool (air bleed wire), move the
  • using the special tool, Air Bleed Wire, move the
  • special tool to prevent the adjuster from falling

Source: manual:Mitsubishi-2.0L-2.4L-Service-Manual-106992-Revision-D.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.