Mitsubishi — Clean-Up Hydraulic Oil Filter
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Procedure
- Drain the transmission case oil.
- Loosen the two bolts and remove the hydraulic oil filter under the right part of the transmission case.
- Thoroughly clean the removed filter in detergent solution.
- Repair or replace the filter if it has breaks.
- Install the filter ensuring the pipe end is inserted into the hole beside the suction pipe, then install the cover.
- Check for oil leakage.
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.