Mitsubishi — Air Cleaner Element Cleaning
Maintenance
From a Mitsubishi owner's manual — check it applies to your exact model before use.
Browse Mitsubishi generators & specs →
Before you start
- Never use the element before it is completely dry.
Procedure
- Remove dust pan clamp and take out dust pan; clean separator plate ass'y and dust pan.
- Unscrew butterfly bolt and take out the element.
- Blow compressed air below 7 kg/cm2 (100 psi) to remove dust completely.
- Blow dust out of the rubber seal inside and the tap hole.
- Element may be washed in synthetic detergent, rinsed and dried completely before mounting.
- Assemble element to body and fasten with butterfly bolt.
- Assemble separator plate ass'y to dust pan ass'y and install to body observing the top mark.
Tools required
- Compressed air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Compressed air below 7 kg/cm2 (100 psi)
Source: Mitsubishi owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.