Military MEP MEP-804A — Bleed and prime fuel system
Maintenance
For the Military MEP MEP-804A, from the Military MEP service manual.
Applies to: Military MEP MEP-804A
Before you start
- Fuel is flammable.
Procedure
- Loosen priming pump cap on fuel injection pump.
- Prime fuel injection pump several times.
- Loosen bleeder screw on fuel injection pump.
- Operate priming pump until no bubbles visible in discharged fuel.
- Retighten bleeder screws and priming pump cap securely.
Full service-parts list: Military MEP MEP-804A →
Source: Military MEP service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.