Home›Repair guides›Military MEP›Air Cleaner Assembly Inspection and Service

Military MEP MEP-804A — Air Cleaner Assembly Inspection and Service

Maintenance

For the Military MEP MEP-804A, from the Military MEP operator's manual.

Applies to: Military MEP MEP-804A, Isuzu C-240 engine

Parts for this job

  • 6115-01-530-1458 Air filter — Military MEP MEP-804A buy
  • 5142101750 Air filter — Isuzu C-240 engine KuduParts $22.00

Part numbers from the service-parts lists for Military MEP MEP-804A, Isuzu C-240 engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Shut down generator set
  2. Open air cleaner access door
  3. Loosen retaining clamp and remove end cap
  4. Remove wing nut and air cleaner element
  5. Wipe housing interior with clean lint-free cloth
  6. Install air cleaner element, wing nut, end cap
  7. Hand tighten retaining clamp

Tools required

  • Generator Mechanical Tool Kit Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Military MEP MEP-804A →, Isuzu C-240 engine →

Source: Military MEP operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Military MEP repair guides →