Military MEP — Engine Air Cleaner Service
Maintenance · Air cleaner assembly
From a Military MEP operator's manual — check it applies to your exact model before use.
Browse Military MEP generators & specs →
Before you start
- Eye protection is required when working with compressed air.
Procedure
- Set ENGINE CONTROL switch to OFF/RESET, DEAD CRANK SWITCH OFF, Battery Disconnect OFF.
- Open left rear access door.
- Loosen wing nut and remove outer filter element.
- Remove cotter key, indicator nut and inner filter element.
- Squeeze rubber dust cup several times to expel dust.
- Wipe housing interior with clean lint-free cloth.
- Clean elements with compressed air (do not exceed 15 psi) or by tapping.
- Reset indicator nut by applying suction; install inner and outer elements.
Tools required
- Compressed air (max 15 psi) Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Compressed air pressure not to exceed 15 psi
Source: Military MEP operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.