Mercury Marine MCM 4.3L / MCM 4.3L EFI — Checking Engine Oil Level / Filling

Maintenance · Crankcase

For the Mercury Marine MCM 4.3L / MCM 4.3L EFI, from the Mercury Marine service manual.

Procedure

1. Stop engine and allow boat to come to a rest.
2. Allow oil to drain back into oil pan - approximately 5 minutes.
3. Remove dipstick, wipe clean and reinstall fully.
4. Remove dipstick and note the oil level.
5. Oil level must be between FULL or OP RANGE and ADD marks.
6. If below ADD mark, remove oil filler cap from valve rocker arm cover.
7. Add required amount of oil to bring level to, but not over, FULL mark.

Source: Mercury Marine service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Mercury Marine repair guides →