Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Trim Covers Installation

Mercedes Benz MBE 4000 — Engine Trim Covers Installation

For the Mercedes Benz MBE 4000.

Browse Mercedes Benz generators & specs →

Procedure

  1. Insert the front trim cover into the frame and secure to the front of the air intake manifold with two bolts. Torque the bolts to 12 N·m (9 lb·ft).
  2. Insert the rear trim cover into the frame and secure to rear of air intake manifold with two bolts. Torque the bolts to 12 N·m (9 lb·ft).
  3. Insert two side trim covers into the trim frame and secure cover with six bolts.
  4. Connect the 31-pin vehicle harness connector at the front trim cover.

Tools required

  • Torque wrench

Specs & torque values

  • 12 N·m (9 lb·ft) torque for trim cover bolts

Source: manual:mbe-4000-workshop-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.