Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Engine Trim Covers Removal

Mercedes Benz MBE 4000 — Engine Trim Covers Removal

For the Mercedes Benz MBE 4000.

Browse Mercedes Benz generators & specs →

Procedure

  1. Loosen the hose clamp at the air inlet hose at the air compressor and move hose out of the way.
  2. Disconnect the 31-pin vehicle harness connector at the front trim cover by pushing on tab of 31-pin connector and rotating the connector counterclockwise.
  3. Remove the two engine side trim covers by removing six bolts securing the cover to the air intake manifold.
  4. Remove the rear engine trim cover by removing the two bolts securing it to the rear of the air intake manifold.
  5. Remove the two bolts from the front trim cover and remove cover.

Source: manual:mbe-4000-workshop-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.