MAN — Tensioning and changing V-belt - Crankshaft / water pump / tension pulley
Adjustments · V-belt drive
From a MAN operator's manual covering: D 2842 LE 602, D 2842 LE 604, D 2842 LE 606, D2842 LE607. Check it applies to your exact model before use.
Before you start
- In a multiple belt drive, always replace the complete set of belts if wear or differing tensions are found.
Procedure
- Remove fixing bolts
- Remove lock-nut
- Adjust nut until V-belts have correct tension
- Retighten lock-nut and fixing bolts
- To change the V-belt, turn back the setting nut and swivel the tension pulley inwards
Source: MAN operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.