MAN — Cleaning fuel pre-cleaner
Maintenance
From a MAN operator's manual covering: D 2842 LE 602, D 2842 LE 604, D 2842 LE 606, D2842 LE607. Check it applies to your exact model before use.
Procedure
- Remove filter housing
- Wash out filter housing and gauze filter in clean Diesel fuel and blow them out with compressed air
- Reassemble using a new seal
- Screw on filter housing and tighten it to 10-12 Nm
- Actuate plunger of hand priming pump until the overflow valve of the injection pump opens audibly
- Screw in and tighten plunger on hand pump
- Start engine
- Check fuel pre-cleaner for leaks
Tools required
- compressed air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Tighten filter housing to 10-12 Amazon eBay FridayParts $169.30 Nm
Source: MAN operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.