Home›Repair guides›MAN›Changing oil filter

MAN — Changing oil filter

Maintenance

From a MAN operator's manual covering: D 2842 LE 602, D 2842 LE 604, D 2842 LE 606, D2842 LE607. Check it applies to your exact model before use.

Before you start

  • The oil is hot and under pressure when the drain plug is opened - risk of burns and scalds.
  • Used oil filters are classed as dangerous waste.

Procedure

  1. Allow the filter content to run off along the drain plug
  2. After releasing the clamping bolts remove the filter bowls
  3. Renew the filter cartridges and thoroughly clean all other parts in cleaning fluid
  4. Use new gaskets for reassembly of the filter bowls
  5. Hold the filter bowl firmly when tightening the tensioning screw to prevent the seal twisting

Source: MAN operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More MAN repair guides →