Magnum — Raising the Tower
Operation · Mast (manual winch)
From a Magnum owner's manual covering: LR 114630-1, MLT 4060, MLT 4080. Check it applies to your exact model before use.
Applies to: Magnum MLT 4060, Magnum MLT 4080, Mitsubishi L3E-W461ML engine
Before you start
- Never raise or lower the mast while the unit is operating.
- Do not extend the mast beyond the colored mark on the middle mast tube.
Procedure
- Remove the mast cradle locking pin from the mast cradle.
- Check both cable sets for wear; make sure cables are centered in pulleys.
- Make sure the area behind the unit is clear before raising the mast.
- Remove safety pin from mast lock bar; raise mast vertical with lower winch.
- Ensure mast lock bar snaps into place and secure with the safety pin.
- Use upper mast winch to telescope tower to desired height.
- Loosen locking knob to rotate mast, then tighten knob.
Full service-parts list: Magnum MLT 4060 →, Magnum MLT 4080 →
Source: Magnum owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.