Magnum MTP6000S3 — Trailer Wheel Bearing Lubrication
Maintenance · Trailer axle
For the Magnum MTP6000S3, from the Magnum operator's manual.
Applies to: John Deere PE4024HF285 engine
Before you start
- Use only a high quality grease made specifically for lubrication of wheel bearings.
Procedure
- Remove the small rubber plug on the grease cap.
- Attach a standard grease gun fitting to the grease zerk fitting.
- Pump grease into the fitting until new grease is visible around the nozzle of the grease gun.
- Wipe excess grease from the hub with a clean cloth.
- Replace the rubber plug.
Tools required
- Grease gun Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Minimum recommended lubrication every 12 months or 12,000 miles (19,312 km)
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.