Magnum MTP6000S3 — Lifting the Pump
Operation
For the Magnum MTP6000S3, from the Magnum operator's manual.
Applies to: John Deere PE4024HF285 engine
Before you start
- Use lifting and moving equipment in good condition with adequate capacity to prevent personal injury or equipment damage.
Procedure
- Remove suction and discharge piping from pump prior to moving.
- Make sure lifting equipment is in good condition and has sufficient capacity.
- Attach slings, chains or hooks directly to the central lift point on top of the unit.
- Use forklift pockets with care, approaching the unit as perpendicular as possible.
- Make sure any obstructions are clear of the forklift tines before lifting.
Tools required
- Slings, chains, hooks, forklift Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.