Magnum MLT4200IF4 — Towing the Unit

Operation · Trailer

For the Magnum MLT4200IF4, from the Magnum operator's manual.

Applies to: Magnum MLT4200IF4, Isuzu 4LE2TAGV-03 engine

Procedure

1. Raise the rear jack and outrigger jacks into travel position and lock the pins
2. Slide outriggers into the frame and lock the pins
3. Raise or lower the trailer onto the tow vehicle hitch with the tongue jack; attach safety chains
4. Grease the leveling jack fittings
5. Connect trailer wiring and check directional/brake lights
6. Confirm the mast cradle locking pin is in place and doors are latched
7. Remove bulbs from light fixtures if driving over rough ground
8. Check trailer tire inflation
9. Torque wheel lugs in three passes if a tire was removed: 20-25, then 50-60, then 90-120 ft-lbs

Full service-parts list: Magnum MLT4200IF4 →, Isuzu 4LE2TAGV-03 engine →

Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Magnum repair guides →