Magnum MLT4200IF4 — Shutting Down the Unit

Operation · L401 Controller

For the Magnum MLT4200IF4, from the Magnum operator's manual.

Applies to: Magnum MLT4200IF4, Isuzu 4LE2TAGV-03 engine

Procedure

1. Remove all loads from the receptacles
2. Switch each light circuit breaker OFF
3. Switch the main circuit breaker OFF
4. Press the Stop/Reset (O) button
5. Move the Control Power switch to OFF after the unit shuts down

Full service-parts list: Magnum MLT4200IF4 →, Isuzu 4LE2TAGV-03 engine →

Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Magnum repair guides →