Home›Repair guides›Magnum›Light Tower Set Up

Magnum MLT4200IF4 — Light Tower Set Up

Installation · Mast/Trailer

For the Magnum MLT4200IF4, from the Magnum operator's manual.

Applies to: Magnum MLT4200IF4, Isuzu 4LE2TAGV-03 engine

Before you start

  • Keep area above the unit clear of overhead wires and obstructions; mast extends to 30 ft (9.14 m)

Procedure

  1. Locate the unit at or above the area to be illuminated
  2. Place unit on firm, flat ground and block the wheels
  3. Rotate the tongue jack 90° and raise the trailer tongue off the tow vehicle
  4. Connect a good earthen ground to the grounding stud near the trailer tongue
  5. Extend and lock the outriggers, then rotate and lower the outrigger jacks
  6. Level the trailer using all four jacks
  7. Adjust and aim the lamps, then tighten hardware and connect to the junction box

Full service-parts list: Magnum MLT4200IF4 →, Isuzu 4LE2TAGV-03 engine →

Source: Magnum operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Magnum repair guides →