Leroy-Somer — Dismantling the motor (general)
Repair & overhaul
From a Leroy-Somer service manual — check it applies to your exact model before use.
Before you start
- First switch off and lock the power supply before any work on the motor.
Procedure
- Open the terminal box, mark the wires and their positions.
- Disconnect the power supply wires.
- Uncouple the motor from the equipment being driven.
- Always use an extractor to remove any devices mounted on the shaft end.
- Refer to the detailed instructions for the relevant motor range.
Tools required
- extractor Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Leroy-Somer service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.