Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Kubota›Draining Tar of LPG Vaporizer

Kubota WG972-GL-E3F — Draining Tar of LPG Vaporizer

Maintenance

For the Kubota WG972-GL-E3F, from the Kubota service manual.

Browse Kubota generators & specs →

Before you start

  • Apply a liquid gasket (Three Bond 1104 or equivalent) to the thread of the plug.

Procedure

  1. Operate the engine until it is warmed up.
  2. The stop solenoid valve is shut and the engine is stopped naturally.
  3. Place an oil pan underneath the drain port.
  4. Remove the drain plug, and drain tar.
  5. Tighten the drain plug.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kubota repair guides →