Kubota WG972-GL-E3F — Changing Engine Oil
Maintenance · Engine oil / drain plug
For the Kubota WG972-GL-E3F, from the Kubota service manual.
Browse Kubota generators & specs →
Before you start
- Be sure to stop engine before changing engine oil.
- Never mix two different types of oil.
Procedure
- Start and warm up the engine for approx. 5 minutes.
- Place an oil pan underneath the engine.
- Remove the drain plug at the bottom of the engine and drain the oil completely.
- Screw the drain plug.
- Fill new oil up to upper line on the dipstick.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Engine oil capacity: 3.4 L
- Drain plug tightening torque: 33 to 37 N·m
Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.