Kubota — PC-Based Service Tool

For these Kubota models: 1302, PCC1302.

Browse Kubota generators & specs →

Procedure

1. Meter Calibration: There are two sets of AC in-
2. Regulation Calibration: This calibrates the 3
3. Voltage Adjust: Once both the metering and
4. Start the genset and allow it to
5. Calibrate voltage reading for L1 by
6. Shut the generator set OFF.
7. Repeat Step 3 to Step 6 for L2

Source: manual:Cummins-PowerCommand-1.1-operator-manual.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.