Kubota — G GENERAL

A Kubota service procedure — check it applies to your exact model before use.

Browse Kubota generators & specs →

Procedure

1. 2. GENERAL PRECAUTIONS
2. • During disassembly, carefully arrange removed parts in a clean
3. area to prevent confusion later. Screws, bolts and nuts should be
4. replaced in their original position to prevent reassembly errors.
5. • When special tools are required, use KUBOTA genuine special
6. tools. Special tools which are not frequently used should be
7. made according to the drawings provided.
8. • Before disassembling or servicing live wires, make sure to
9. always disconnect the grounding cable from the battery first.
10. • Remove oil and dirt from parts before measuring.

Source: manual:01-kubota-03e-series-wsm-manual-enu.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.