Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Checking Engine Oil Level

Kubota — Checking Engine Oil Level

A Kubota service procedure — check it applies to your exact model before use.

Browse Kubota generators & specs →

Before you start

  • Be sure to keep the oil level between upper and lower limits of the dipstick. Too much oil may cause a drop in output.

Procedure

  1. Level the engine.
  2. To check the oil level, draw out the dipstick (1), wipe it clean, reinsert it, and draw it out again.
  3. Check to see that the oil level lies between the two notches.
  4. If the level is too low, add new oil to the specified level.

Source: manual:01-kubota-03e-series-wsm-manual-enu.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.