Kubota D-905 / WG-750 — Replace the Hydraulic Tank Filter
Maintenance
For the Kubota D-905 / WG-750, from the Kubota service manual.
Browse Kubota generators & specs →
Before you start
- Beware of hot oil.
Procedure
- Clean area around filter.
- Remove filter with oil filter wrench.
- Apply thin oil to new gasket.
- Install new filter Genie 20293, tighten by hand.
- Start engine or activate boom up.
- Inspect for leaks.
Tools required
- oil filter wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Genie part no. 20293 KuduParts $14.99
Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.