Kubota D-905 / WG-750 — Replace Engine Oil and Filter - Engine Models
Maintenance
For the Kubota D-905 / WG-750, from the Kubota service manual.
Browse Kubota generators & specs →
Before you start
- Beware hot engine parts and oil.
Procedure
- Warm engine.
- Remove oil filler cap.
- Pull oil drain hose out.
- Open drain valve, drain oil.
- Close drain valve.
- Remove 3 engine pivot plate bolts, swing plate.
- Remove oil filter, install new filter.
- Fill with new oil per specifications.
Tools required
- oil filter wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Kubota WG-750 FridayParts $11.00 oil 3.9 quarts (3.25 liters) 10W-30 Amazon eBay $54.99
- Kubota D-905 FridayParts $8.19 SinoCMP $49.00 oil 5.4 quarts (5.1 liters) 10W-30 Amazon eBay $54.99
- Oil filter WG-750 FridayParts $11.00 Genie 22106 Amazon eBay
- Oil filter D-905 FridayParts $8.19 SinoCMP $49.00 Genie 31744 Amazon eBay $5.39
Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.