Kubota D-905 / WG-750 — How to Bleed the Platform Rotator

Maintenance

For the Kubota D-905 / WG-750, from the Kubota service manual.

Browse Kubota generators & specs →

Before you start

Crushing hazard. Keep hands clear of platform pivot weldment.

Procedure

Connect clear hose to top bleed valve.
Open top bleed valve.
Start engine or turn key to ground control.
Hold platform rotate switch right 5 seconds, repeat three times.
Hold left 5 seconds.
Rotate fully left until air stops.
Close valve, rotate right to center.
Repeat for bottom bleed valve.

Tools required

clear hose Amazon
container Amazon

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kubota repair guides →