Kubota — Cleaning Air Filter Element
Maintenance · Intake system
From a Kubota service manual — check it applies to your exact model before use.
Browse Kubota generators & specs →
Before you start
- Never apply oil to the dry element.
Procedure
- Use clean dry compressed air on the inside of the element.
- Air pressure at the nozzle must not exceed 690 kPa.
- Maintain reasonable distance between the nozzle and the filter.
Tools required
- compressed air Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- 690 kPa (7 kgf/cm2, 100 psi) max
Source: Kubota service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.