Kubota — Check to see that the oil level lies between the two notches

A Kubota service procedure — check it applies to your exact model before use.

Browse Kubota generators & specs →

Procedure

1. 3. If the level is too low, add new oil to the specified level.
2. IMPORTANT
3. Q
4. • When using an oil of different maker or viscosity from the
5. previous, drain old oil. Never mix two different types of oil.
6. NOTE
7. Q
8. • Be sure to inspect the engine, locating it on a horizontal
9. place. If placed on gradients, accurately, oil quantity may
10. not be measured.

Source: manual:01-kubota-03e-series-wsm-manual-enu.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.