Kohler — Transmission Removal
Repair & overhaul
From a Kohler service manual — check it applies to your exact model before use.
Applies to: Kohler LH775 engine
Before you start
- Weight of transmission is approximately 42 pounds (19 kg).
Procedure
- Park on level surface, raise/support bed, shut engine off, apply parking brake, remove key.
- Drain lubricant if transmission is to be disassembled.
- Remove rear driveshaft.
- Remove primary clutch from engine and secondary clutch from transmission.
- Remove spanner plate from engine and transmission.
- Disconnect wire harness from rotary switch and speed sensor.
- Remove shift cable clevis from transmission lever.
- Remove two flange head screws and flange nuts securing transmission to mount tabs.
- Raise and rotate transmission to clear engine and mount; remove from vehicle.
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.