Home›Repair guides›Kohler›Starting

Kohler TP 4.0 D — Starting

Operation · Pump

For the Kohler TP 4.0 D, from the Kohler owner's manual.

Browse Kohler generators & specs →

Before you start

  • Carbon Monoxide. Can cause severe nausea, fainting or death. Only use product outdoors.
  • Rotating Parts can cause severe injury. Stay away while pump is in operation.
  • Never operate pump without priming water or pump will overheat; dry operation destroys mechanical seal.

Procedure

  1. Immerse suction strainer (I) completely in liquid; place on a stone base if blockage risk.
  2. Fill body of pump with water via discharge port (B) or pump filler cap (F).
  3. Connect two discharge half-couplings (G) and straight suction half-couplings (J).
  4. Set speed control lever (Q) to MIN position.
  5. Slowly pull recoil starter handle (P) once until resistance is encountered, then return gently.
  6. Pull rapidly and vigorously on recoil starter handle (P) until engine starts; repeat if needed.

Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →