Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Kohler›Remove Back Plate

Kohler TP 4.0 D — Remove Back Plate

Repair & overhaul

For the Kohler TP 4.0 D, from the Kohler service manual.

Browse Kohler generators & specs →

Procedure

  1. Remove screws securing back plate to engine.
  2. These are special screws with special washers; replace with same part numbers if needed.
  3. Inspect back plate for cracks or bends; replace if necessary.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →