Kohler TP 4.0 D — Install Back Plate
Installation
For the Kohler TP 4.0 D, from the Kohler service manual.
Browse Kohler generators & specs →
Procedure
- Apply Loctite® 587™ Ultra Blue or equivalent to screws.
- Replace back plate and hold in position.
- Secure with screws and washers.
- Torque back plate screws to 17.6-20.3 N·m (13-15 ft. lbs.).
Tools required
- torque wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Back plate screws: 17.6-20.3 N·m (13-15 ft. lbs.)
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.