Home›Repair guides›Kohler›Check Oil Level

Kohler TP 4.0 D — Check Oil Level

Maintenance · Engine

For the Kohler TP 4.0 D, from the Kohler owner's manual.

Browse Kohler generators & specs →

Procedure

  1. Remove dipstick (R) and wipe it.
  2. Put back dipstick (R) then take it out again; check level is between upper and lower limits.
  3. Fill if necessary using a funnel.
  4. Put dipstick (R) back in place.
  5. Check that there are no leaks.
  6. Wipe off excess oil with a clean cloth.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Oil level must be between upper and lower limit of dipstick

Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →