Kohler TP 4.0 D — Change Oil and Filter
Maintenance · Engine
For the Kohler TP 4.0 D, from the Kohler owner's manual.
Browse Kohler generators & specs →
Before you start
- Drain engine oil into an approved container. Never drain or spill engine oil onto floor.
Procedure
- Change oil while engine is warm; clean area around oil fill cap (C).
- Remove oil drain plug (T) and oil fill cap (C); allow oil to drain completely.
- Reinstall oil drain plug (T).
- With a hex key, remove oil filter holder screws (U); remove oil filter and discard.
- Clean oil filter holder and apply clean engine oil onto oil filter joint.
- Install new oil filter; thread holder screws (U) and tighten.
- Fill crankcase with new oil to top of indicator on dipstick (R).
- Reinstall oil fill cap (C) and tighten securely.
- Start engine, check for oil leaks; stop, correct leaks, recheck level.
- Dispose of used oil per local ordinances.
Tools required
- hex key Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Oil capacity (refill) 1.2 L (1.3 U.S. qt)
Source: Kohler owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.