Kohler TH16 / TH18 — Change Engine Oil
Maintenance · Lubrication system
For the Kohler TH16 / TH18, from the Kohler service manual.
Browse Kohler generators & specs →
Before you start
- Drain oil while engine is still warm.
Procedure
- Clean areas around drain plug, dipstick, and oil fill cap.
- Remove one oil drain plug (either side of crankcase).
- Allow all oil to drain, then reinstall drain plug and torque to 13.6 N-m (10 ft. lb.).
- Remove oil fill cap and fill to 'F' mark on dipstick.
- Reinstall oil fill cap.
Specs & values
- Drain plug torque: 13.6 N-m (10 ft. lb.)
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.