Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Suction Inlet (Plastic) Service

Kohler — Suction Inlet (Plastic) Service

A Kohler service procedure — check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • The whirlpool must not be operated without the suction hood installed.

Procedure

  1. Remove screw securing suction hood to inlet housing.
  2. Remove hood from inlet housing by unscrewing hood counterclockwise.
  3. Replace any parts as necessary and clean all surfaces before reassembly.
  4. Secure hood into place.
  5. Install screw securing suction head to inlet housing.

Source: manual:OM-SA_100194_0884.pdf. Figures and steps are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.