Home›Repair guides›Kohler›Starting and Stopping - Basic and Meter Box Models

Kohler — Starting and Stopping - Basic and Meter Box Models

Operation · Controller

From a Kohler service manual covering: 10/15RMOY, 15/17.5ROY, 15RMY, 22.5-47.5ROZ, 22.5/32.5RZ. Check it applies to your exact model before use.

Applies to: Kohler 15RMY

Procedure

  1. Move Generator Main Switch to AUTO position to allow start-up by automatic transfer switch or remote start-stop switch.
  2. If not connected to an automatic transfer or remote start-stop switch, move Generator Main Switch to TEST position for normal start-up.
  3. To stop: run generator set at no load for 5 minutes to allow engine cool-down.
  4. Move Generator Main Switch or remote start-stop switch to OFF position.

Specs & values

  • Run at no load for 5 minutes for cool-down

Full service-parts list: Kohler 15RMY →

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →