Home›Repair guides›Kohler›Service Low-Profile/Commercial Mower Air Cleaner

Kohler — Service Low-Profile/Commercial Mower Air Cleaner

Maintenance · Air Cleaner/Intake

From a Kohler service manual covering: CV17, CV18, CV20, CV22, CV23, CV25, CV620, CV621, CV630, CV640, CV641, CV670…. Check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • Operating engine with loose or damaged air cleaner components could cause premature wear and failure.
  • Paper element cannot be blown out with compressed air.

Procedure

  1. Loosen knob and remove air cleaner cover.
  2. Precleaner: remove from paper element; replace or wash in warm water with detergent; rinse and air dry.
  3. Saturate precleaner with new engine oil; squeeze out excess oil.
  4. Paper Element: clean area around element; remove wing nut, element cover, and paper element with precleaner.
  5. Separate precleaner from element; service precleaner and replace paper element.
  6. Check condition of rubber seal and replace if necessary.
  7. Install new paper element on base; install precleaner over element; reinstall element cover and secure with wing nut.
  8. Reinstall air cleaner cover and secure with knob.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →