Kohler — Running an Individual Generator

Operation · MCP 3000 Individual Control

From a Kohler service manual — check it applies to your exact model before use.

Browse Kohler generators & specs →

Procedure

1. Navigate to the individual control screen on the HMI.
2. Verify the generator ready status field is active (green).
3. Touch the Run button to run the generator.
4. Touch the Auto button to place the generator in Auto.
5. Touch the Off button to stop and disable remote starting.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →