Home›Repair guides›Kohler›Reset the Generator Set after Emergency Stop

Kohler — Reset the Generator Set after Emergency Stop

Operation

From a Kohler operator's manual covering: KD1250-4, KD2500, KD3250, KD700-KD4000. Check it applies to your exact model before use.

Applies to: Kohler KD1250-4, Kohler KD2500, Kohler KD3250

Before you start

  • The generator set will not crank until the reset procedure is completed.

Procedure

  1. Investigate and correct the cause of the emergency stop.
  2. Reset the emergency stop switch.
  3. Press and hold the generator set OFF/RESET button for 3 seconds.
  4. After resetting all faults, press RUN and/or AUTO to restart the generator set.

Specs & values

  • Press and hold OFF/RESET 3 seconds

Full service-parts list: Kohler KD1250-4 →, Kohler KD2500 →, Kohler KD3250 →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →