Home›Repair guides›Kohler›Replace Fuel Pump (pulse style)

Kohler — Replace Fuel Pump (pulse style)

Maintenance · Fuel System

From a Kohler service manual covering: CV17, CV18, CV20, CV22, CV23, CV25, CV620, CV621, CV630, CV640, CV641, CV670…. Check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • Explosive Fuel can cause fires and severe burns. Do not fill fuel tank while engine is hot or running.

Procedure

  1. Disconnect fuel lines from inlet and outlet fittings.
  2. Remove screws (securing pump) and fuel pump.
  3. Remove pulse line that connects pump to crankcase.
  4. Install a new pump using screws.
  5. Connect pulse line between pump and crankcase.
  6. Torque screws to 2.3 N·m (20 in. lb.).
  7. Connect fuel lines to inlet and outlet fittings.

Specs & values

  • Fuel pump fastener 2.3 N·m (20 in. lb.)

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →