Home›Repair guides›Kohler›Removing the Motor and Pump

Kohler — Removing the Motor and Pump

Maintenance

From a Kohler service manual covering: 60388-M, 60660-H, 60660-M, 60661-H, 60661-M, 60662-M, 60663-M, K-1409-SA, K-1410-SA, K-1422-SA, K-1482-SA, K-1484-SA…. Check it applies to your exact model before use.

Browse Kohler generators & specs →

Before you start

  • Turn GFCI OFF.
  • Be careful not to strip threads on studs.

Procedure

  1. Disconnect pump from suction and harness tubes.
  2. Remove bolts or nuts and washers securing motor and pump to tub.
  3. Remove motor and pump.
  4. Disconnect motor power cord leads from air switch power module at the motor.
  5. Replace in reverse order.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →