Facts About Generators
GeneratorsDirectoryCompareRepairEnginesControllersPartsManufacturersGuides
Search models or part #
Home›Repair guides›Kohler›Procedure to Create Screen Shot Files

Kohler — Procedure to Create Screen Shot Files

Operation · Controller

From a Kohler operator's manual covering: KD1250-4, KD2500, KD3250, KD700-KD4000. Check it applies to your exact model before use.

Applies to: Kohler KD1250-4, Kohler KD2500, Kohler KD3250

Procedure

  1. Insert a flash drive into the USB port on the front of the APM603 controller.
  2. Check for the flash drive symbol near the top of the screen.
  3. Navigate to the desired screen and press the Alarm Silence/Lamp Test button once.
  4. Wait at least 5 seconds to allow the png file to be saved to the flash drive.
  5. Repeat for each screen as needed.
  6. Remove the flash drive and insert it into a USB port on your PC to verify the files.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Full service-parts list: Kohler KD1250-4 →, Kohler KD2500 →, Kohler KD3250 →

Source: Kohler operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →