Kohler MPAC 1500 — Current Sensing Kit Installation

Installation

For the Kohler MPAC 1500, from the Kohler service manual.

Browse Kohler generators & specs →

Procedure

1. Obtain the appropriately rated current sensing kit (with 10 ft harness) before starting.
2. Install according to Figure 62 and connect the current transformers as shown in Figure 63.
3. Connect harness GM40562 (10 ft harness).
4. Assemble CTs on load bus (A, B & C); remove and reassemble lugs before mounting CTs.
5. Hi side of CTs must always face toward the contactor.

Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Kohler repair guides →