Kohler MPAC-1000 — Getting Started (Start Program and Change Settings)
Operation · MPAC Setup Program
For the Kohler MPAC-1000, from the Kohler service manual.
Browse Kohler generators & specs →
Before you start
- Change the user name and password to prevent unauthorized personnel from changing system settings.
Procedure
- Click Start > Programs > MPAC Setup Program.
- Log in by entering the user name and password.
- Select Tools > Options and enter the COM port connected to the controller.
- Select Connection > Connect to connect the PC to the transfer switch controller.
- Select Window > New Window and choose a window from the list.
- To change settings, open the display window and select Window > Setup.
- Arrange the windows on the screen, e.g. Window > Cascade Windows.
- Save screens and settings if desired.
- Choose Connection > Disconnect.
- Choose File > Exit.
Tools required
- Null modem cable Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Default user name: ATS
- Default password: T340
- Recommended scan rates: 200--300 FridayParts $20.99 milliseconds
Source: Kohler service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.